For Y-Bridle applications, the length of the bow bridle legs is 2x the distance between the bow cleats minimum in order to keep the inside angle formed by the bridle legs at the Y-Point very acute. Overall Length - The rule-of-thumb for the OAL of the mooring pendant assembly = 2.5x - 3.0x the freeboard minimum unless otherwise directed by the mooring field manager or other AHJ. Motor Yachts and Sailboats with a high freeboard and no ease-of-access to trailer bow eye and or they do not have one, it is then necessary to use the bow cleats in order to connect the mooring bridle legs to the mooring system. For boats with a low freeboard, it is usually possible to have access to the trailer bow eye in order to connect a single leg mooring pendant. We have both galvanized and stainless steel hardware.įreeboard - Is the distance from the water line to the deck. Hardware - As the working load limit of the Mooring Pendant increases, the type of hardware that may be used becomes more critical (HD Thimbles, Quick Release Snap Shackles, and Trigger Release Shackles). Several Chafe Guard Options are Available. The same chafe guard tubing can be also installed below the eye down the line to protect the rope from chafing against hawser holes, etc. Permanent or Shackled Connections - The connection between the mooring pendant and the swivel eye hook or shackle can be a permanent spliced connection (the hook is connected directly to the thimble) or a temporary connection (the hook is connected to the thimble via a shackle).Ĭovered Eye Splices - To protect an eye splice from chafing on a cleat, the eye splice can be providing with chafe guard tubing. Simply select the required splices and hardware for each end of the mooring pendant as required for your application. The mooring line might well be fitted with a rope float(s). The hook or clip connects the thimble eye of the mooring line directly to the bow eye of the boat being moored and or the mooring buoy. Thimble Eye Splice - Mooring Pendants like anchor lines are provided with a thimble eye splice on one end (even both ends), which provides rope chafe protection for the connection to a shackle, swivel eye hook, anchor swivel, or spring clip. Mooring Pendant Bridle assemblies have the shape of a V or Y depending on the Owner’s preference. The mooring line might well be fitted with a buoy or rope float(s). On the other end, a hard eye with a stainless steel swivel hook, spring clip, anchor swivel, and or shackle for making fast to the buoy connection. A typical line will have a dock line eye splice (covered eye) for connecting to the boat’s cleat or a hard eye for connecting to the boat’s trailer bow eye via hardware. a Mooring Pendant, which have characteristics of both dock lines and anchor lines and the associated hardware connections. The boat can free wheel about the mooring depending on the wind direction.īuoy Field Mooring - When a boat is moored in a buoy field, a custom mooring line can be utilized i.e. Mooring Pendant (type of mooring line) is a relatively short length of line used to connect a vessel to a mooring buoy (or mooring) usually via the boat’s bow eye or bow cleats. The Best Custom Boat Lines, Custom Colored Ropes, & Special Assemblies made to Your Specifications
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |